CALL US 24/7: 1-888-919-3309

USED EQUIPMENT

2014 Claas 760TT

Year 2014
Manufacturer Claas
Model 760TT
Location Elie, Manitoba, Canada
Hours 1,785
Stock Number AG11551A

Descriptions:

  • *304 Gallon Fuel Tank - Corn and Small Grain~Includes one 210 gallon primary fuel tank and one 94 gallon secondary fuel tank.
  • *Turbo Chop Chopper with Active Spreader - Corn and Small Grain~88 rotating knives for chopping straw or corn stalks and actively spreading residue using rotary spinners on the tailboard up to 45 ft, pending conditions. Includes chaff spreader and external manual speed control. Includes: G03 0110 Turbo Chop Speed Adjust.
  • *CEMOS & Cruise Pilot Ready~Processor unit to control CEMOS and/or Cruise Pilot.
  • *Terminal Prepared~Monitor mounting bar across right cab window. Can be utilized to mount CEBIS Mobile or aftermarket displays. Display mounting brackets not included.
  • *Radio "Delphi" with Handsfree Bluetooth~Radio with external microphone, iPod connectivity and line-in port and Bluetooth.
  • *Small Grain Threshing System~6.5x40mm smooth APS grates, closed threshing drum, N7/18 main concave.
  • *HD Unloading Auger 4XL - 29.2 ft.~Heavy Duty wear resistant unloading auger.
  • Base Equipment
  • CRUISE PILOT Software CRUISE PILOT Software
  • *Hydraulic Tilt Adjustment for HP Feederhouse~The header pitch on HP Feederhouses can be adjusted from the cab using a hydraulic cylinder. Requirements: B10 0040 HP Feederhouse or B10 0045 HP Feederhouse for HD Drive.
  • *28L R26~D335 lug pattern.
  • *Variable Speed Rotor Drive - Corn and Small Grain~Change rotor speed from the cab through a wide speed range (360-1050 RPM) to maximize performance and grain quality in all crop conditions.
  • *Specialty Crop Upper Sieve - Small Grain~TM6 adjustable airfoil upper sieves for Small Grains, enhances sample and performance.
  • *Cruise Pilot~Cruise Pilot is an operator assistant that will adjust the ground speed during harvesting to maximize performance while considering material intake, engine load, separation and cleaning losses as well as limits set by operator. Requirements: Q15 0010 Cruise Pilot Ready.
  • *Standard Operator and Trainer Seat - Corn and Small Grain~Standard driver seat and trainer seat with fabric surface.
  • *Flax Rotors with In-cab Rotor Cover Adjustment - Small Grain~Speciality HD Flax rotors and hydraulically actuated rotor covers can be used in Small Grains, Corn, and Rice applications. The rotor covers can be actuated from the cab and allow the operator to adjust the separation area according to harvest conditions. Requirements: D06 0020 Variable Speed Rotor Drive.
  • *Universal Grain Tank 360 bu (12,800 L)~Universal wear resistant grain tank for Corn and Small Grain, hydraulic folding grain tank covers.
  • *Fuel Consumption Monitoring - Corn and Small Grain~Allows precise CEBIS read-out of fuel consumption in gal/hr, gal/bu, gal/acre or for specific area harvested. Information can be printed on CEBIS printer if equipped.
  • *Grainmeter Sensor and Electronic Tailings - Corn and Small Grain~Displays both tailings volume and grain quantity in the tailings on the CEBIS monitor. Requirements: Q08 0012 Quanitmeter.
  • *Includes: Intensive threshing segments
  • *3-D Sieve Cleaning System - Corn and Small Grain~Sieve Box with integrated dynamic side hill compensation system of up to 20%, ventilated pre-cleaning step and fluted turbine fans.
  • *QUANTIMETER - Corn and Small Grain~Yield monitoring with continuous moisture sensor. Includes hydraulic tensioning of clean grain elevator.
  • *Auto Pilot~Steering controller and steering valve to automatically steer the machine. Requires input signal from header (Laser Pilot, Corn Feelers) or an external GPS Steering system.
  • *Unloading Rate 3.8 bu/sec
  • *TURBO CHOP Chopper w/Chaff Spr
  • *4-Link Powered, Adjustable Rear Axle~Intelligent controlled, single motor hydrostatic powered, adjustable rear axle with 4-Link design to allow for larger diameter tires with improved turning radius.
  • *760 Terra Trac Combine - Small Grain Package
  • *Dust Suction Fan for HP Feederhouse - Small Grain~Dust suction fan helps reduce dust produced by feederhouse and header for improved visibility. Requirements: B10 0040 HP Feederhouse.
  • *1770 eng & 1350 sep
  • *HP Feederhouse (Header-Pitch) - Small Grain and Rice~Header pitch adjustable feederhouse to allow tool-free adjustment using a turnbuckle. Recommended for use with MAXFLO headers. Requirements: B04 0023 Auto Contour for HP Feederhouse and either B13 0060 Mechanical Turnbuckle or B13 0070 Hydraulic Tilt Adjustment.
  • *High-End Work Light Package, 6x XENON - Corn and Small Grain~Includes Work Light Package plus 4 additional cab-roof mounted XENON HID lights.
  • *Variable Speed Feederhouse Drive - Small Grain and Rice~Variable Speed Feederhouse and header drive with max 120kW output power.
  • *Auto Contour for HP Feederhouse - Small Grain~Automatic header height control and lateral tilt of header determined by Auto Contour equipped headers. System includes features of Contour plus lateral header tilt. Header lateral tilted by pivoting FH face plate. Requirements: B10 0040 HP Feederhouse. No Charge.
  • *HD IMPELLER WEAR KIT FACTORY INSTALLED
  • *C-Motion Operating Handle~Ergonomically designed, airflow supporting operating handle to control all header and driving functions. Handle allows hand to rest in natural, horizontal position, while improving airflow to palm of hand to prevent sweating. Handle promotes usage of multiple fingers and the thumb.
345,000 CAD

Dealer Information:

AG West Equipment Ltd
Elie, Manitoba, Canada
Phone: 1-877-636-9899

For more information please contact us at 1-888-919-3309

©2020 Toromont Industries Ltd. All Rights Reserved.
Copyright    Privacy Statement    Policies