*CRUISE PILOT~CRUISE PILOT is an operator assistant that will adjust the ground speed during harvesting to maximize performance while considering material intake, engine load, separation and cleaning losses as well as limits set by operator. Requires Q15 0010 CRUISE PILOT Ready.
*Non-powered, Adjustable Rear Axle~Non-Powered, adjustable rear axle with center pivot point design. 10 lug rim. Requirements: N10 0374 500/85R24 rear tires.
*TURBO CHOP Chopper with Active Spreader~88 rotating knives for chopping straw or corn stalks and actively spreading residue using rotary spinners on the tailboard up to 45ft, pending conditions. Includes chaff spreader and external manual speed control. Requires G03 0110 TURBO CHOP Speed Adjust.
*Universal Grain Tank 330 bu (11,500 L)~Universal wear resistant grain tank for corn and small grain, hydraulic folding grain tank covers.
SIEVES *Small Grain SievesShort tooth upper and lower sieves. Standard on Small Grain Combines. No Charge.
UNLOADING AUGER *Heavy-duty Unloading Auger 28.2 ft. - Small GrainProvides additional clearance to any 40 ft wide head for unloading on the go.
FRONT AXLE *Powered, 2-Speed, Adjustable Rear AxleAdjustable 2-speed powered rear axle with 1885/837 cc hydraulic motors. Requires tire with 335mm diameter lug pattern rim.
MONITORING SYSTEM ACCESSORIES *QUANTIMETER - Corn & Small GrainCLAAS Yield Monitoring System with continuous moisture sensor. Also features hydraulic tensioning of clean grain elevator chain. No Charge.
*CLAAS CAN Bus Interface~Includes a CAN Bus Link allowing external connection to 3rd party GPS yield mapping and GPS Steering systems. No Charge.
*Hydraulic Drive for TURBO CHOP and Chaff Spreader~Hydraulic drive for E05 0020 and G02 0064. Must be ordered with E05 0020 TURBO CHOP Chaff Spreader. Can not be ordered individually. Requires G03 0050 manual HYD speed control of TURBO CHOP spreaders.
*304 Gallon Fuel Tank - Corn & Small Grain~Includes one 210 gallon primary fuel tank and one 94 gallon secondary fuel tank. No Charge.
*Flax Rotors with In-cab Rotor Cover Adjustment - Small Grain~Specialty HD Flax rotors. Hydraulically actuated rotor covers can be used on small grains, corn and rice applications. The rotor covers can be actuated from the cab and allow the operator to adjust the separation area according to harvest conditions. Requires D06 0020 Variable Speed Rotor Drive!